Atco D17 and Atco a10
Motivator
Sat, 03/03/2012
Hi All .
Would anyone have the wing nuts for a D17 .And a 3/8 whit bolt for the cup for my A10.
Thanks in advance.
Forums
Atco D17 and Atco a10
Hi, follow the ink to Namrick co, I think you will find them helpful. The wing nuts are listed in the miscellaneous nuts section.
Please check if minimum order levels apply or not but I found them very reasonable recently when my own store of bolts let me down.
Ray.
.
.
Thanks for the reply fella . The D17 is a 1960 mower with a mark 7 Villiers engine . Iwill have to measure the thread as there are 2 sizes for the atco.
The wing nuts on what I
The wing nuts on what I presume is the ATCO Deluxe B17 are universal wing nuts, providing the threading is correct you can get them from any place that sells BSF/BSW nuts and bolts, the same applies for the 3/8 BSW bolt you're looking for.
As far as looking for a place I can't really help you because I tend to buy them on stalls at vintage rallies. Maybe a decent engineering supplier will sell you them.