Atco Balmoral 20s Model indentification
Afternoon all. I need to buy a new set of belts for my Balmoral 20s (cylinder and roller). I am struggling to find the exact model number as there appears to be a couple of different roller drive belts available and I don't want to buy the wrong one. I can't see a model plate anywhere on the mower - I have taken the side covers off and all sorts! To give you clue possibly, it has plastic side covers, a plastic fuel tank and interchangeable cassette type cylinder.
Any help welcomed!
Thanks in advance.
Andy
Forums
Thanks for the reply. Sorry -
Thanks for the reply. Sorry - I was expecting some clues perhaps as to where the model plate might be rather than visual identification! Anyway, here's some pictures. Have shown one of the throttle, plus a few of the mower. As you can see I have the side plate and pulleys off at the moment ready to fit new belts, but I can't find a model plate anywhere!
How do these compare with
How do these compare with what you have found?
F016A58728 for the roller drive
F016A57941 for the cutter drive
As far as the ID plate goes I would have expected an adhesive black and silver tin foil one on the rear of the chassis . Perhaps there is one under the cover over the shaft from the engine to the belt case.
From what I can see it’s a ..
From what I can see it’s a ...............
An image or two please.